66″ x 10′ $1,890: H7610WS-030: 76″ x 10′. I39 Supply trailer sales, rental and trailer repair is in central Wisconsin. Our convenient location is near Cascade Mountain on Interstate 39. We stock over 250 trailers at all times. Our trailer purchasing power provides value to customers because we can special order trailers with. Shop for the Aspenhome Sheffield I39-360WD Traditional 66' Writing Desk with Faux Leather Top at Del Sol Furniture - Your Phoenix, Glendale, Tempe, Scottsdale, Avondale, Peoria, Goodyear, Litchfield, Arizona Furniture & Mattress Store.
342 I39-1 Dayton CSD 22.94 83.35 11.34 3.31 120.94 0.244246 91.40 0.063227 113.29 I39-1 344 I39-2 Huber Heights CSD 22.94 66.74 11.34 2.58 3.31 106.91 0.160345 89.77 0.173224 88.39 I39-2 346 I39-3 Fairborn CSD 22.94 55.35 11.34 3.45 3.31 96.39 0.242324 73.03 0.217513 75.42 I39-3. Multiple units were called to the scene of the crash at about 1:44 p.m. Monday by the Hwy. 52 parkway ramp. Several lanes are blocked, according to witnesses. As of 1:48 p.m., one vehicle was engulfed in flames and heavy holiday traffic is backed up for several miles. Only one person was injured in the crash and was transported to a local hospital. The Illinois Tollway system map can assist you in your travels on the 294-mile system. Which includes the Tri-State Tollway (I-94/I-294/I-80), Jane Addams Memorial Tollway (I-90), Reagan Memorial Tollway (I-88), Veterans Memorial Tollway (I-355), and the Illinois Route 390 Tollway.
FURNITURE CARE
This furniture has been crafted for years of enjoyment and should be maintained with a non-abrasive, soft cloth and a high quality furniture polish. Consult with your furniture store professional about the product to use. Always dust in the direction of the grain with a lightly damp cloth. Moisture should not remain on furniture after dusting. Furniture should be kept in a climate controlled environment. Avoid exposure to heat, chemicals, water and strong sun light to avoid fading and drying out.
To prevent scratching, use felt discs under lamps and accessories that are placed on furniture. If you choose to use glass on top of wood, use discs between the glass and wood to allow air circulation.
Metal hardware has a protective finish to prevent tarnishing and requires only an occasional dusting. If you wish to polish hardware, consult your furniture retailer for a quality polish. Do not use alcohol, ammonia or other harsh cleaners as they will remove the finish.
If your furniture has a stone top, it should be protected from liquids, sunlight and temperature extremes. Use a lightly moistened cloth to clean the surface, or consult your furniture retailer for a recommended marble polish. When in storage, the stone top should be stored flat without heavy objects on it. Use caution when moving to protect the stone from breakage.
1FG
Teardown. Quiet Pawls. Loud Pawls. Full suspension. Hardtail. Spinning a semi-slick and pushing a fat knobby. When my Project 321 hub review went live on June 20th, 2018, I was confident that I'd hit all the angles other than the fact I wanted to continue pounding on it so I could speak more definitively to its reliability.
Here I am in March 2019, still spinning smoothly on the original EZO bearings with a fresh take on the project courtesy my Kona Honzo ST and a stint playing with a tensioner on my Marin Rift Zone. I've been single speeding the P321 for months now.
It's as not as dramatic as the epiphany that led to my Stache Retrial but since we're here I have to admit I missed a subtle but remarkable comparative between the P321 and other high end hubs I've ridden. With a perfect chain line and absent the rear derailleur, the lack of drag from the magnetically actuated drive system is impressive.
From the first ride down the block running #1FG I noticed the comparative lack of drag.
Crazy? I also had a couple of friends who borrowed my Honzo and remarked how fast the hub felt.
Project in a project. If I had a DH/Shuttle/Park bike I'd run it SS for sure. Going uphill was HARD.
I've ridden a whole host of high-end hubs and from the low-engagement 20° DT Swiss, to the Mavic middle ground, to the faster Chris King, or Industry Nine, or Race Face Vault, and the instant engaging True Precision Stealth. None has felt faster rolling in the stand or on the trail* when running my bike single speed.
I39 1 66 Drive
The flip side is I can't tell the difference once a multi-speed drive train is installed and it hasn't magically made me comparatively faster than my friends. I guess it wasn't a big enough difference to overcome my lunch muscle but this bike nerd was impressed to the point that I wouldn't do another hub review without being certain to run it single speed for a while for the true comparison.
*With comparable tires
The Litany
It's quite possible that the NSMB test-writer stable has had more hours on Project 321 hubs in the past couple of years than anything else and certainly we've spilled a lot of ink that included mention of them.
Tim Coleman did a series on the We Are One Composites wheelset that he thrashed through multiple chains and rings without having to touch it. In the end he said 'the bearings are still tight with no play. The freehub is smooth and still has perfect engagement. The wheels spin with ease.'
Tim put thousands of Shore-style kilometers into these We Are One laced P321 hubs with solid praise. Photo: Dave Smith
Music tag editor pro 4 0 16. Life myself, Mr Coleman found that he never needed to touch the adjustable bearing preloader. Photo: Dave Smith
Cam McRae has been riding the new Crankbrothers Synthesis E 11 carbon wheelset, which ships with Project 321 hubs as original equipment. It's an ongoing test process featuring the quiet pawls and 'some special sauce - the Purple Drank - to make them a even quieter' thanks to Jeff at Wheelthing.
It's the lower engagement 2.5° setup compared to the 1.66° system I've been testing. The difference being that 3/6 pawls are engaged at a time compared to 2/6 in the hubs I've been riding.
Crankbrothers has been selling significantly more of their P321 equipped E 11 wheelsets than the less expensive E model with the same rims. Photo: Crankbrothers
This is the first rear hub I've had with adjustable bearing tension that has never come loose on the trail. I have cleaned and lubed the drive system twice since Jeff and I did the initial Teardown.
I use the same Dumonde Tech freehub lube in almost every hub that comes through my domain*, which makes it pretty easy to qualify the comparable sealing quality of different hubs. The double seal on the P321 freehub is wet coast rated with the only - unscientifically - better example in my mind being the Race Face Vault.
*The exception is Chris King
The Easy Reviews
What do the 16 USD Renthal Ultra Tacky Push-On grips, 105 USD Bontrager SE4 29x3 tires, and the 415 USD Project 321 rear hub* have in common? The easiest reviews are always the ones where I can say unequivocally that I would spend my own money on the product in question and these are examples where I have.
I needed a new non-Boost hub for my single speed and my short list ended up being very short - Chris King, Race Face Vault, and the Project 321. Toast titanium 17 4 lug. To my mind the Project 321 has the best combination of rapid engagement, high quality bearings, drag, and user serviceability on the market.
*The 185 USD Front hub is a really nice piece of kit too, but it's a front hub - the rear is where the magic happens.
I needed to buy a new hub for my non-Boost single speed - it was an obvious decision for me.
Running the 1.66° P321 with a 32x22t setup and a 29x2.6 SE5 tire on a Velocity i39 rim. Awesome Shore To Sky winter setup.
We're currently fortunate to have great hub options and it's easy to appreciate why a rider with this budget would choose to go King, or Onyx etc. depending on which features they most value.
I39 1 66 76
The sub 285-gram Project 321 rear hub has earned a place in any high end hub conversation. Made in Bend, Oregon by nice folks who are always happy to answer questions. More information at Project 321.
